Electric chain Hoist Model HC +

Enclosure and insulation of electrical components

Lifting & Traveling motors: IP55 Protection - Class “F insulation”

Limit switches: IP65 minimum protection - Maximum voltage 600

Electric power supply

3 phase 50 Hz 415V ± 5%

Working Conditions

Working temperature: minimum -10°C; maximum +40°C

Maximum relative humidity: 90%

Maximum altitude: 2000m above sea level

The hoist must be installed indoors, in a well-ventilated environment free of corrosive vapors (acid vapors, saline mist)

Noise-Vibrations

Vibrations produced by the hoist are not hazardous for the health of workers

Special Features: NEW GENERATION HC+

Hoist Body:

Light and compact body with gravity die cast high grade aluminum alloy. Motor: cylindrical sliding rotor brake motor, with single speed or double speed. The motor is flange-mounted to the body of the hoist. Asbestos-free brake. Designed for high number of cyclic operations.

Hoist Drive:

Precision cut case hardened alloy steel gears, high grade grease lubricated for long life and noiseless operation.

Load Chain Wheel:

Five pocket machined & hardened load chain wheel for smooth load handling and prevents overriding of load chain.

Overload protection:

Slipping clutch protects the hoist from mechanical overload. The slipping clutch is adjustable from the outside.

Chain guide:

The chain guide guarantees the perfect chain entry and exit.

Load Chain:

Imported grade 80 surface hardened for long life & wear resistance.

Chain Collector:

Made up of high grade wear and impact resistant suitable safe storing.

Hook block:

High resistance hook with safety latch. The hook rotates on a bearing, located in the steel case.

Control:

Contactor control 24VAC 50Hz with the ergonomic push-button switch. Emergency stop as standard.

Rotarygear limit switch:

A limit switch installed on hoist, limiting the hook path upwards and downwards. It is possible to set intermediate positions, 24VAC 50Hz besides the upper and lower ones.